Running Powder Coated Cast Bullets in Glock 20 10mm

    Share
    avatar
    Cornmastah
    .44 Magnum
    .44 Magnum

    Posts : 1014
    Join date : 2014-04-07
    Location : Utah

    Running Powder Coated Cast Bullets in Glock 20 10mm

    Post by Cornmastah on Tue Mar 22, 2016 12:51 pm

    I was playing around with some 10mm loads this last weekend and decided to skip the lonewolf barrel and see how they worked in the regular Glock barrel. I used some hard cast, powder coated 200 gr TC bullets with about 11 gr of AA#9. I was surprised how clean AA#9 burns. I had very little unburned powder as well as minimal fouling. They shot great, left the barrel clean (no lead in my barrel), and were accurate enough on paper. Since I was at the indoor range, I was unable to clock the loads with my chronograph. This is a picture of my barrel after about 100 rounds:

    avatar
    Tennessee Jed
    .41 Magnum
    .41 Magnum

    Posts : 743
    Join date : 2014-02-27
    Location : Music City USA

    Re: Running Powder Coated Cast Bullets in Glock 20 10mm

    Post by Tennessee Jed on Sun Mar 27, 2016 8:43 am

    Once again you have inspired me. Every once in a while I am in bear country and would like a load like this for my G20. I am going to try this.

      Current date/time is Thu Oct 19, 2017 7:40 am